Quadro SW-Version 4.1.x Guia de Instalação descarregar pdf (Página 95)

QuadroISDN Manual II: Administrator's Guide Extension User’s Menus

QuadroISDN; SW Version 4.1.x 95

The Circular Mode checkbox enables the call hunting start over when the last extension in the Call Hunting table has been called and there is still

with no answer. When this checkbox is not selected, call hunting will terminate once the last extension in the Call Hunting table does not answer the

call, the incoming call will then be redirected to the Voice Mailbox of the extension call it originally called (if enabled) or it will be disconnected.

Note: The Voice Mail Service will be activated on the extension initiating the Call Hunting only after all extensions in the Call Hunting table are called

at least once, regardless the No Answer Timeout configured from the Error! Reference source not found.

page.

Unconditional Call Forwarding

Unconditional Call Forwarding is a service of Quadro that allows the automatic unconditional transfer of incoming calls to a variety of other

destinations.

Please Note: By setting up the unconditional forwarding service, Many Extension Ringing and Call Hunting services will be automatically

disabled.

The Enable Service checkbox selection activates the

unconditional call forwarding service on the current extension.

The table displayed here lists the destinations where the

incoming call from a particular caller should be unconditionally

forwarded.

Enable/Disable functional button is used to enable/disable the

corresponding forwarding destinations. This is helpful to avoid

removing forwarding destination(s) if they are not applicable at

the moment.

Add opens the Add Entry page to add forwarding destinations.

It consists of the following components:

Call Type lists the available call types:

• PBX - forwarding destination is a local Quadro extensions

or Auto Attendant

• SIP – forwarding destination is reached through a SIP

server

• PSTN – forwarding destination is a PSTN user

• Auto – used for undefined call types. In this case, the

routing pattern will be considered and parsed through the

Local Routing Table.

The Forward To text field requires the SIP address (see chapter

Entering a SIP Addresses correctly), extension or PSTN

number, where an incoming call from a certain caller should be

unconditionally forwarded. If the address already exists in the

table, selecting Save will display the error “Caller address

already exists”. A wildcard is allowed in this field (see chapter

Entering a SIP Addresses correctly). Entering “*” as PBX or

PSTN addresses will apply the configuration of Caller ID Based

services to all extensions or PSTN users.

Fig. 3-25 Unconditional Call Forwarding page

Fig. 3-26 Call Forwarding – Add Entry page

Two digits should be inserted in the Forward To text field for the PBX call type. The PSTN number length depends on the area code and phone

number.

When saving the unconditional call forwarding configuration, a message will notify the user that Many Extension Ringing and Call Hunting services

have been disabled.

Logout

This option is used to close the session between the user PC and Quadro and to leave the Quadro Web Management or enter into the management

with another login. By selecting the Web Management link, the startup page will be displayed and the user will need to login again.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 105 106

Comentários a estes Manuais

Sem comentários

Quadro SW-Version 4.1.x Guia de Instalação Página 95

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de troca automática de ramais privados (PBX) Quadro SW-Version 4.1.x