Quadro SW-Version 4.1.x Guia de Instalação descarregar pdf (Página 34)

QuadroISDN Manual II: Administrator's Guide Administrator’s Menus

QuadroISDN; SW Version 4.1.x 34

1. General Settings (for attendant extension)

This group requires personal extension information and has the

following components:

Display Name is an optional parameter used to define the Auto

Attendant’s description. Usually the display name appears on

the called party’s phone display when a call is made or a voice

mail is sent.

With the Enable FAX Forwarding checkbox enabled, the

system moves the incoming FAX to the selected extension if a

FAX tone is detected on the Auto Attendant.

The Extension to forward drop down list is used to choose the

extension where the incoming FAX addressed to the Quadro’s

Auto Attendant will be forwarded. The list contains only those

extensions that have FAX support enabled. FAX support can be

enabled from the

Extension Codecs page.

Please Note: FAX forwarding is applicable only for incoming

calls from PSTN and IP networks. It is not valid for PBX calls.

Fig. II-60: Extensions Management - Edit Entry – General Settings for Auto Attendant page

With the Show on Public Directory checkbox enabled, the details of the corresponding extension will be displayed in the User Settings table on the

Main Page of the Extension’s Quadro Web Management (accessed by the extension’s login, see Manual III – Extension User’s Guide). Besides this,

the details of the extension will be displayed in the Public Directories on the Snom and Aastra SIP phones. Leave this checkbox unselected if the

extension is reserved or not used, or when the extension serves as an intermediate unit for call forwarding, etc.

The Percentage of System Memory drop down list is used to define the space for the Auto Attendant’s system messages. The maximum value in

the drop down list is equal to the maximum available space for voice messages on Quadro.

2. Attendant Scenario

This group is used to select between default and custom attendant functionality scenarios. When the Default scenario is selected, a group of settings

should be adjusted. Here, the user defined Auto Attendant system messages can be uploaded and the list of Friendly Phones can be configured.

For Custom scenario, a scenario script file (in EpygiXML coding, the coding standard can be found at

Epygi Technical Support) should be defined

and the custom voice messages can be uploaded.

The Default manipulation radio button selection enables

following components:

• The Send AA Digits to Routing Table checkbox

selection switches the Auto Attendant to the routing

mode. Any inserted digits on the Auto Attendant

prompt will be parsed through the Routing Table on

the Quadro.

• Redirection on Timeout - this group allows

automatic call redirection in case if no action has been

performed by the caller. The group offers the following

options:

Enable Redirection on Timeout checkbox is used to

enable/disable the automatic call redirection.

Menu Message Repetition Count text field indicates

the number of Recurring Attendant Prompts to be

consecutively played to the caller with no action from

his/her side. When the Recurring Attendant Prompt is

played the number of times indicated in this text field,

the call will be automatically redirected to the defined

destination.

Fig. II-61: Extensions Management - Edit Entry – Attendant Scenario page

Call Type drop down list includes possible incoming call types (PBX, PSTN, SIP or Auto). PBX selection means that the call will be

redirected to the local extension. SIP selection means that the call will be redirected to the SIP destination correspondingly. PSTN

selection means that the call will be redirected to the PSTN destination. Auto selection is used for undefined call types: destination

(independent on whether it is a PBX number, SIP address or PSTN number) will be reached through Routing.

Call To text field requires the destination number dialed in the format depending on the selected Call Type. The wildcard is supported in

this field.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 105 106

Comentários a estes Manuais

Sem comentários

Quadro SW-Version 4.1.x Guia de Instalação Página 34

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de troca automática de ramais privados (PBX) Quadro SW-Version 4.1.x