Quadro SW-Version 4.1.x Guia de Instalação descarregar pdf (Página 57)

QuadroISDN Manual II: Administrator's Guide Administrator’s Menus

QuadroISDN; SW Version 4.1.x 57

The Inbound Prefix text field requires entering the symbols (alphanumerics and any characters supported in the SIP username) that will be placed

in front of the Inbound Caller Pattern instead of the discarded digits. (For example, if the routing pattern is 12345, the Number of Discarded

Symbols is two, and the prefix digits are 909, the final phone number will be 909345.) Wildcards are allowed here (see chapter

Entering a SIP

Addresses correctly

The Inbound Call Type drop down list gives you the option to select the call type (PBX, SIP, ISDN, Any) used by the inbound caller to reach the

Quadro.

The Next button will open the Call Routing Wizard - Page 4 where different information about Inbound Caller will be required depending on the

selected Inbound Call Type. For the SIP Inbound Call Type, the Inbound Host text field will require one or more IP addresses or host names of the

SIP server where the caller is registered, or the caller’s device if they are direct calls, separated by a space. If the ISDN Inbound Call Types are

selected, the Inbound Port ID drop down list will require selecting the ISDN Trunk, and in the next step, a list of timeslot(s) used to receive calls from

the defined caller.

The Call Routing Wizard - Page 5 appears if the Set Date / Time

Period(s) checkbox previously had been enabled on Page 1 of the

Local Call Routing Wizard. It will require information about the

pattern validity period(s).

This page provides selection between Typical and Custom

date/time rule definitions.

The Typical selection contains the following group of radio buttons

that are used to select the frequency of the corresponding routing

pattern that is to take place:

• Daily

• Weekly – the preferred weekday(s) should be selected for

this option.

• Monthly – the calendar day should be selected for this

option.

• Annually – the calendar day and month should be selected

for this option.

In the Available Time Period drop down lists, the time range of

the pattern validation should be defined. Any time selected in this

field will be considered corresponding to the Quadro’s

Time/Date

Settings

The Custom selection provides the option to manually define the

validity period(s). Use the following format to insert pattern

date/time rule(s):

[Month,Month-Month,...][Day-Day,Day,...][hh:mm-hh:mm,...]; ...

Fig. II-100: Call Routing Wizard - page 5

The Duplicate functional button is used to create a routing pattern with the settings of an exiting one. This is to avoid configuring a new routing entry

completely by duplicating an existing entry with different settings. To use the Duplicate button only one record may be selected, otherwise the error

message “One row should be selected” will appear. The Duplicate button opens the Call Routing Wizard where all fields except the Pattern field

are already filled in. A Pattern for the new route will be required anyway.

The Move Up/Move Down buttons are used to move call routing patterns one level up or down within the Call Routing table. The sequence of the

routing patterns is important when making routing calls because the Call Routing table is parsed from the top down and routing will take place

according to the first pattern that matches the dialed number. The Move To button is used to move the selected entry to a different position in the

Call Routing Table. This will increase or decrease the selected pattern’s priority. Pressing the button will open the page where a row number should

be specified together with the position the selected entry is to be placed (before or after the defined row).

The Local AAA Table page allows you to manage local

authentication and the authorization database. Callers dialing the

routes which have an AAA (Authentication, Authorization, and

Accounting) option enabled, will pass the authorization on the

Local AAA Table by using a phone number or

username/password, depending on the corresponding entry

configuration on this page.

The caller passes authorization automatically if the detected phone

number of the caller dialing a route has the AAA option enabled

and is registered in the Local AAA Table. If the caller ID service is

disabled or the caller’s phone number is not registered, the caller is

asked to enter a registration user name and password.

The Add functional button opens the Call Routing – Local AAA

Table - Add Entry page where a new local AAA record can be

created.

Fig. II-101: PSTN User Registration page

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 105 106

Comentários a estes Manuais

Sem comentários

Quadro SW-Version 4.1.x Guia de Instalação Página 57

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de troca automática de ramais privados (PBX) Quadro SW-Version 4.1.x