Quadro Quadro2x2 Guia de Instalação descarregar pdf (Página 30)

QuadroM 32x/8L/26x/12Li/26xi Manual I: Installation Guide Step 2: Configuring the Quadro

Finishing the System Configuration Wizard

Fig. I-33: System Configuration Wizard finishing page

Click on Finish to complete the System Configuration Wizard. The Quadro will then stop in-

ternal functions and apply the changes made in the Wizard.

Fig. I-34: Wizard Execution Progress page

After this is complete, the Quadro will reply with the Confirm Settings page requesting

confirmation of the changes. Press on OK to confirm the settings.

Fig. I-35: Confirm Settings page

Please Note: You must confirm the settings within 20 minutes. Otherwise the device will

revert back to the previous configuration and reboot.

Please Note: If you do not use DHCP for your LAN and you have changed your LAN set-

tings, make sure that the IP address of the PC connected to Quadro is still within the speci-

fied IP address range, otherwise your PC may not establish a connection to Quadro.

If you changed the network configuration of the LAN, restart your LAN connection to re-

ceive a new IP address from the new network. Then you can access the Web Management

of the Quadro on the new IP address you’ve assigned to the Quadro.

QuadroM 32x/8L/26x/12Li/26xi; (SW Version 5.2.x) 30

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 75 76

Sem comentários

Quadro Quadro2x2 Guia de Instalação Página 30